Radiator, radiator hoses and thermostat - XK120
alloy, lightweight type with high efficiency core
Required: 1
made from aluminuim with polished finish, lightweight type with fantastic finish and high efficiency core - made in the UK
Required: 1
new item with original film type core in it so is an exact replica of the original with pressed tanks too
Required: 1
exchange item with standard copper core
Required: 1
radiator - pressure: 10 PSI
May replace original filler cap with 4 PSI
Required: 1
thermostat housing to radiator
Required: 2
heater hose to thermostat housing
Required: 1
water pump to thermostat housing
Required: 1
worm type - bypass hose to thermostat housing
Required: 1
worm type - bypass hose to water pump
Required: 1
top - straight variant
To engine no. W1250
Required: 1
bottom (to water pump) - length: 8.5"
To engine no. W1250
Required: 1
top - curved variant
From engine no. W1251
Required: 1
bottom (to water pump) - length: 7.5"
From engine no. W1251
Required: 1
worm type - bottom radiator hose
Required: 2
under bottom nut
Stay to chassis side member
Required: 2
under top nut
Stay to chassis side member
Required: 2
Kevlar reinforced. Set with 7 lines incl. heater hoses, characteristic: straight top hose
To engine no. W1250
Required: 1
Kevlar reinforced. Set with 7 lines incl. heater hoses, characteristic: curved top hose
From engine no. W1251
Required: 1
with fabric interlayer for reinforcement. Set with 7 lines incl. heater hoses, characteristic: straight top hose
To engine no. W1250
Required: 1
with fabric interlayer for reinforcement. Set with 7 lines incl. heater hoses, characteristic: curved top hose
From engine no. W1251
Required: 1
made of high quality silicone. Set with 8 lines incl. heater hoses
Required: 1
