Stub axle and wheel hub
front suspension. Variant with polyurethane bushes
Required: 1
front suspension. Variant with rubber bushes
Required: 1
front uspension, upper
Required: 2
shock absorber to suspension link trunnion - barrel type
Required: 4
shock absorber to suspension link trunnion - top hat type
Required: 4
shock absorber to suspension link trunnion
Required: 4
with BSF thread
BN1. Only in connection with the original king pin
Required: 2
with UNF thread
BN2 to BJ8 (1955-68)
Required: 2
with UNF thread. May replace original slotted nut
BN2 to BJ8 (1955-68)
Required: 2
stub axle - 8 piece kit, each 0.59" thick
Required: 1
replaces bronze thrust washer in the top trunnion. Complete car set
Required: 1
used item - identified by BSF thread
BN1 to 221403 (1953-54)
Required: 2
new item - identified by UNF thread
BN1 from 221404 (1954-55) - can also be used for earlier models
Required: 2
used item - identified by UNF thread
BN2 (1955-56)
Required: 2
competition type - identified by UNF thread
BN2, BN4, BN6, BN7, BT7 and BJ7, BJ8 to 26704 (1955-64)
Required: 2
used item - identified by UNF thread
BN4, BN6, BN7 and BT7, BJ7 to 21766 (1956-63)
Required: 2
used item - identified by UNF thread
BJ7 from 21767, BJ8 to 26704 (1963-64)
Required: 2
new - supplied in pairs
BJ8 from 26705 (1964-68)
Required: 1
for genuine stub axle with BSF thread
BN1 to 221403 (1953-54)
Required: 2
for stub axle with UNF thread
BN1 from 221404 and all BN2 to BJ8 (1954-68)
Required: 2
king pin, upper. Ream after fitting
Required: 2
king pin, lower. Ream after fitting
Required: 2
with UNF thread - please note: Must be fitted together with nyloc nut 212114
Required: 2
for genuine king pin with BSF thread
BN1 to 221403 (1953-54)
Required: 2
for king pin with UNF thread
BN1 from 221404 and all BN2 to BJ8 (1954-68)
Required: 2
for genuine king pin with BSF thread
BN1 to 221403 (1953-54)
Required: 2
for king pin with UNF thread
BN1 from 221404 and all BN2 to BJ8 (1954-68)
Required: 2
LH brake caliper to stub axle
BN7, BT7 and BJ7, BJ8 to 26704 (1959-64)
Required: 1
RH brake caliper to stub axle
BN7, BT7 and BJ7, BJ8 to 26704 (1959-64)
Required: 1
adaptor plate to stub axle
BN7, BT7 and BJ7, BJ8 to 26704 (1959-64)
Required: 8
adaptor plate to stub axle
BN7, BT7 and BJ7, BJ8 to 26704 (1959-64)
Required: 8
LH - new item
BN1 (1953-55)
Required: 1
RH - new item
BN1 (1953-55)
Required: 1
LH - new item
BN2, BN4, BN6, BN7, BT7, BJ7 and BJ8 (1955-68)
Required: 1
RH - new item
BN2, BN4, BN6, BN7, BT7, BJ7 and BJ8 (1955-68)
Required: 1
steering lever to stub axle - length: 4"
BN1 (1953-55)
Required: 4
steering lever to stub axle - length: 3.1/4"
BN2, BN4 and BN6 (1955-59)
Required: 2
steering lever to stub axle - length: 3.1/2"
BN2, BN4 and BN6 (1955-59)
Required: 2
steering lever to stub axle - length: 3.1/2"
BN7, BT7 and BJ7, BJ8 to 26704 (1959-64)
Required: 2
steering lever to stub axle - length: 4"
BN7, BT7, and BJ7, BJ8 to 26704 (1959-64)
Required: 2
steering lever to stub axle - length: 1.1/4"
BJ8 from 26705 (1964-68)
Required: 2
steering lever to stub axle - length: 3.1/2"
BJ8 from 26705 (1964-68)
Required: 2
steering lever to stub axle
BN1 (1953-55)
Required: 4
steering lever to stub axle
BN2, BN4, BN6, BN7, BT7 and BJ7, BJ8 to 26704 (1955-64)
Required: 4
stub axle
BJ8 from 26705 (1964-68)
Required: 2
front suspension
BN1 (1953-55)
Required: 2
front suspension
BN4 and BN6 with disc wheels (1956-59)
Required: 2
front suspension
BN2, BN4 and BN6 with wire wheels (1955-59), all BN7, BT7 and BJ7 plus BJ8 to 26704 (1959-64)
Required: 2
front suspension
BJ8 from 26705 (1964-68)
Required: 2
front suspension - inner bearing
BN1 (1953-55) plus BN4 and BN6 with disc wheels (1956-59)
Required: 2
front suspension - inner bearing
BN2, BN4 and BN6 with wire wheels (1955-59) plus all BN7, BT7, BJ7 and BJ8 (1959-68)
Required: 2
wheel bearing
BN1 (1953-55)
Required: 2
wheel bearing
BN2, BN4, BN6, BN7, BT7 and BJ7 (1956-63) plus BJ8 to 26704 (1963-64)
Required: 2
wheel bearing
BJ8 from 26705 (1964-68)
Required: 2
front wheel bearing - diameter: 7/8"
BN2, BN4, BN6, BN7, BT7 and BJ7 plus BJ8 to chassis no. 26704 (1955-64)
Required: 2
front wheel bearing - diameter: 3/4"
BJ8 from 26705 (1964-68)
Required: 2
front suspension - outer bearing
BN1 (1953-55)
Required: 2
front suspension - outer bearing
BN4 and BN6 with disc wheels (1956-59)
Required: 2
front suspension - outer bearing
BN2, BN4 and BN6 with wire wheels (1955-59), all BN7, BT7 and BJ7 plus BJ8 to 26704 (1959-64)
Required: 2
front suspension - outer bearing
BJ8 from 26705 (1964-68)
Required: 2
wheel bearing - identified by BSF thread
BN1 to 221403 (1953-54)
Required: 2
wheel bearing - identified by UNF thread
BN1 from 221404, BN2 to BJ8 (1954-68)
Required: 2
front suspension - for vehicles with disc wheels
BN4 and BN6 (1955-59)
Required: 2
front suspension - for vehicles with disc wheels
BN7, BT7 and BJ7, BJ8 to 26704 (1959-64)
Required: 2
front suspension - used item for vehicles with disc wheels
BN7, BT7 and BJ7, BJ8 to 26704 (1959-64)
Required: 2
front suspension - for vehicles with disc wheels
BJ8 from 26705 (1964-68)
Required: 2
front wheel hub - for vehicles with disc wheels
BN4 and BN6 (1955-59)
Required: 2
front wheel hub - for vehicles with disc wheels
BN7, BT7, BJ7 and BJ8 (1959-68)
Required: 2
brake drum to wheel hub - for vehicles with disc wheels
BN4 and BN6 (1956-59)
Required: 10
brake disc to wheel hub - for vehicles with disc wheels
BN7, BT7, BJ7 and BJ8 (1959-68)
Required: 10
brake disc to wheel hub - for vehicles with disc wheels
BN7, BT7, BJ7 and BJ8 (1959-68)
Required: 10
brake disc to wheel hub - for vehicles with disc wheels
BN7, BT7, BJ7 and BJ8 (1959-68)
Required: 10
front suspension - for vehicles with disc wheels
BN4 and BN6 (1956-59)
Required: 10
front suspension - for cars with disc wheels only. 1.3/8" long wheel stud, which must be minimally shortened
BN7, BT7, BJ7 and BJ8 (1959-68)
Required: 10
for disc wheels
BN4, BN6, BN7, BT7, BJ7 and BJ8 (1956-68)
Required: 10
LH front - characteristic: 12 TPI thread, 42 mm fitment, mounting with 4 bolts
BN1 (1953-55) and 100S (1955)
Required: 1
RH front - characteristic: 12 TPI thread, 42 mm fitment, mounting with 4 bolts
BN1 (1953-55) and 100S (1955)
Required: 1
LH front - characteristic: 12 TPI thread, 42 mm fitment, mounting with 4 bolts
BN2, BN4 and BN6 (1955-59)
Required: 1
RH front - characteristic: 12 TPI thread, 42 mm fitment, mounting with 4 bolts
BN2, BN4 and BN6 (1955-59)
Required: 1
LH front - characteristic: 12 TPI thread, 42 mm fitment, mounting with 5 bolts
BN7, BT7 and BJ7 plus BJ8 to 26704 (1959-64)
Required: 1
RH front - characteristic: 12 TPI thread, 42 mm fitment, mounting with 5 bolts
BN7, BT7 and BJ7 plus BJ8 to 26704 (1959-64)
Required: 1
LH front - characteristic: 8 TPI thread, 42 mm fitment, mounting with 5 bolts
BJ8 from 26705 (1964-68)
Required: 1
Vorderachse, rechts - Merkmal: 8 TPI Gewinde, 42 mm Aufnahme, Befestigung mit 5 Bolzen
BJ8 from 26705 (1964-68)
Required: 1
wire wheel hub to front brake drum
BN1 (1953-55) and 100S (1955)
Required: 8
wire wheel hub to front brake drum
BN2, BN4 and BN6 (1955-59)
Required: 8
wire wheel hub to front brake disc
BN7, BT7 and BJ7, BJ8 to 26704 (1959-64)
Required: 10
wire wheel hub to front brake disc
BJ8 from 26705 (1964-68)
Required: 10
wire wheel hub to front brake drum
BN1, 100S, BN2, BN4 and BN6 (1953-59)
Required: 8
wire wheel hub to front brake disc
BJ8 from 26705 (1964-68)
Required: 10
self locking - wire wheel hub to front brake drum
BN1 and 100S (1953-55)
Required: 8
wire wheel hub to front brake drum
BN2, BN4 and BN6 (1955-59)
Required: 10
self locking - wire wheel hub to front brake disc
BN7, BT7 and BJ7, BJ8 to 26704 (1959-64)
Required: 10
wire wheel hub to front brake disc
BJ8 from 26705 (1964-68)
Required: 10
front wire wheel hub
BN1, 100S, BN2, BN4, BN6, BN7, BT7 and BJ7 plus BJ8 to 26704 (1953-64)
Required: 2
front wire wheel hub
BJ8 from 26705 (1964-68)
Required: 2
for front suspension grease cap on vehicles with wire wheels
Required: 1
Chrome-plated spinners, 42 mm spline, in various designs
Required: 2