Oil sump BN4, BN6, BN7, BT7, BJ7 and BJ8
reproduction in steel
Alternatives
Required: 1
steel - reconditioned, in exchange
Alternatives
Required: 1
oil drain on tin oil sump with 3/4" UNS thread
Required: 1
oil drain on alloy oil sump with 5/8" UNC thread
Required: 1
for aluminium oil sump 20860, 10832, 215131
Required: 1
oil sump attachment - length: 1/2"
BN4 and BN6
Required: 25
oil sump attachment - length: 1/2"
BN7, BT7, BJ7 and BJ8
Required: 23
oil sump attachment - length: 1"
BN7, BT7, BJ7 and BJ8
Required: 2
oil pressure release valve
Required: 1
oil pressure operating valve
Required: 1
oil pressure operating valve - used item
Required: 1
new item
Required: 1
gear type
BN7 and BT7 from engine no. 29D-H895, all BJ7 and BJ8 - can also be fitted to earlier models
Required: 1
BN7 and BT7 from 29D-H895, all BJ7 and BJ8.
May replaced by oil pump 1740 (ill. 32)
Required: 1
oil pump driven gear
BN7 and BT7 from engine no. 29D-H895 plus alle BJ7 and BJ8 (1959-68)
Required: 1
oil pump driving gear
BN7 and BT7 from 29D-H895, all BJ7 and BJ8.
May replaced by oil pump 1740 (ill. 32)
Required: 1
oil pump
BN7 and BT7 from 29D-H895, all BJ7 and BJ8.
May replaced by oil pump 1740 (ill. 32)
Required: 1
oil pump
BN7 and BT7 from 29D-H895, all BJ7 and BJ8.
May replaced by oil pump 1740 (ill. 32)
Required: 1
BN7 and BT7 from 29D-H895, all BJ7 and BJ8.
May replaced by oil pump 1740 (ill. 32)
Required: 1
BN7 and BT7 from 29D-H895, all BJ7 and BJ8.
May replaced by oil pump 1740 (ill. 32)
Required: 4
BN7 and BT7 from 29D-H895, all BJ7 and BJ8.
May replaced by oil pump 1740 (ill. 32)
Required: 4
BN7 and BT7 from 29D-H895, all BJ7 and BJ8.
May replaced by oil pump 1740 (ill. 32)
Required: 4
oil pump
BN4 to engine no. 38262 (1956-57)
Required: 1
oil pump
BN4 from engine no. 38263 plus all BN6, BN7, BT7, BJ7 and BJ8 (1957-68)
Required: 1
high output rotary type, hand built in house
all BN4 and BN6, BN7 and BT7 to engine no. 29D-H894 - can also be fitted to later models
Required: 1
BN4, BN6, BN7 and BT7 to 29D-H894.
May be replaced by oil pump 317525 (ill. 16)
Required: 1
BN4, BN6, BN7 and BT7 to 29D-H894.
May be replaced by oil pump 317525 (ill. 16)
Required: 4
BN4, BN6, BN7 and BT7 to 29D-H894.
May be replaced by oil pump 317525 (ill. 16)
Required: 4
Required: 1
crankshaft, rear
Required: 1
for crankshaft conversion - separately
Required: 1
front and rear main bearing cap
Required: 4
non-setting gasket and jointing compound
Required: 1
Content: 80 ml (?125.12 / 1000 ml)
Curil K2 - non hardening
Permanently plastic, particulary adhesive, for highliy stressed sealing joints. Recommended for the fitting of oil seals
Required: 1
Content: 60 ml (?166.67 / 1000 ml)
