Solid axle - 1500, 1600 and 1622
4.55:1 ratio
Alternatives
Required: 1
4.3:1 ratio
Alternatives
Required: 1
4.1:1 ratio
Alternatives
Required: 1
3.9:1 ratio
Alternatives
Required: 1
rebound strap. Must be welded to the rear axle casing
Required: 2
Differential carrier to axle casing
Required: 10
Differential carrier to axle casing
Required: 10
Brake anchor plate to axle casing
Required: 8
1500 with disc wheels to chassis no. 10916, 1500 with wire wheels to 11449
Required: 2
LH
1500 with disc wheels from chassis no. 10917, 1500 with wire wheels from 11450, all 1600 and 1622
Required: 1
RH
1500 with disc wheels from chassis no. 10917, 1500 with wire wheels from 11450, all 1600 and 1622
Required: 1
propshaft to differential
Required: 1
self locking
Propshaft to differential
Required: 4
differential
Required: 1
Crown wheel bearing cap to casing
Required: 4
Crown wheel bearing cap to casing
Required: 4
Required: 1
differential - identified by 10 inner splines and 16 outer splines
1500
Required: 2
differential - identified by 26 inner splines and 16 outer splines
1600 with disc wheels to chassis no. 82892, 1600 with wire wheels to chassis no. 82748
Required: 2
differential - identified by 25 inner splines, 16 outer splines and 17.3 mm flange height
1600 with disc wheels from chassis no. 82893, 1600 with wire wheels from chassis no. 82749, all 1622
Required: 2
planet gear shaft
Required: 1
differential carrier ball bearing - 0.002"
differential carrier ball bearing - 0.003"
differential carrier ball bearing - 0.004"
differential carrier ball bearing - 0.006"
with 10 splines. For disc wheel vehicles only - used item
MGA 1500 (1955-59)
Required: 2
with 26 splines
MGA 1600 with disc wheels to chassis no. 82892 (1959)
Required: 2
with 26 splines - used item
1600 with disc wheels to chassis no. 82892
Required: 2
with 25 splines
1600 with disc wheels from chassis no. 82893, all 1622
Required: 2
Cars with disc wheels only
Required: 2
wheel bearing
Cars with disc wheels only
Required: 2
wheel bearing
Cars with disc wheels only
Required: 2
rear axle
Cars with disc wheels only
Required: 2
wheel bearing
Cars with disc wheels only
Required: 2
hub to half shaft
Cars with disc wheels only
Required: 6
with 10 splines
1500 with wire wheels
Required: 2
with 26 splines
1600 with wire wheels to chassis no. 82748
Required: 2
with 26 splines - this 1" longer half shaft allows wire wheel hubs to be fitted on a disc wheel axle case
MGA 1600 with disc wheels to chassis no. 82892 (1959)
Required: 2
with 25 splines. For wire wheel cars only
1600 with wire wheels from chassis no. 82749, all 1622
Required: 2
Cars with wire wheels only
Required: 2
wheel bearing
Cars with wire wheels only
Required: 2
wheel bearing
Cars with wire wheels only
Required: 2
rear axle
Cars with wire wheels only
Required: 2
LH
Cars with wire wheels only
Required: 1
RH
Cars with wire wheels only
Required: 1
wire wheel hub
Cars with wire wheels only
Required: 2
wire wheel hub to hub
Cars with wire wheels only
Required: 8
with new crown wheel and pinion. Ratio: 3.9:1 (10/39 teeth) - reconditioned, in exchange
Required: 1
exchange - ratio: 4.1:1 (10/41 teeth)
Supplied with new crown wheel and pinion
Required: 1
exchange - ratio: 4.3:1 (10/43 teeth). Half shaft with 10 splines
Supplied with new crown wheel and pinion
Required: 1
exchange - ratio: 4.3:1 (10/43 teeth). Half shaft with 26 splines
Supplied with new crown wheel and pinion
Required: 1
exchange - ratio: 4.3:1 (10/43 teeth). Half shaft with 25 splines
Supplied with new crown wheel and pinion
Required: 1
exchange - ratio: 4.55:1 (9/41 teeth)
Supplied with new crown wheel and pinion
Required: 1
