Power steering unit - Series I to June 1972 (carburettor cars)
long tower type for LHD models. Identify by imperial threads - reconditioned. This item is sold on an exchange basis so a core unit surcharge will apply
LHD models only
Required: 1
long tower type for RHD models. Identify by imperial threads - reconditioned. This item is sold on an exchange basis so a core unit surcharge will apply
RHD cars
Required: 1
Adwest power steering rack - feature: steering rack and track rod ends with imperial threads
Required: 1
with 5/8" UNF thread - variant with grease nipple
Alternatives
Required: 2
with 5/8" UNF thread - variant without grease nipple
Alternatives
Required: 2
track rod end - made from clear nylon
Alternatives
Required: 2
steering rod to rack bar - identified by 2 ears
Required: 2
for steering rod spring - feature: 11.7 mm outer diameter and 2.5 mm thickness
Required: 2
for steering rod pan - feature: 25.3 mm outer diameter and 0.27 mm thickness
Required: 2
power steering
Required: 1
Required: 2
power steering
LHD cars
Required: 1
power steering - is screwed into the upper port of the pinion housing on LHD models
LHD cars
Required: 1
power steering - is screwed into the lower port of the pinion housing on LHD models
Required: 1
power steering
RHD cars
Required: 1
power steering rack. For RHD models
RHD cars
Required: 1
power steering rack. For RHD models
RHD cars
Required: 1
in pinion housing - for upper low pressure hose
Required: 1
in pinion housing - for lower low pressure hose
Required: 1
pinion housing
Required: 1
Required: 1
between pinion housing and power steering unit
Required: 1
Required: 1
steel - between pinion housing and power steering unit
Required: 1
power steering
Required: 1
power steering
Alternatives
Required: 3
power steering. Supplied in sets of 3
Alternatives
Required: 1
power steering unit
Required: 1
Required: 1
pinion housing to power steering unit
Required: 3
pinion housing to power steering unit
Required: 3
