SU-HS4 internal carburettor - late BN7 and BT7
with vent and black hexagonal plastic head - length of the rod: 2.125"
Required: 3
with piston
Required: 3
front carburettor
To 29E-H928
Required: 1
front carburettor
From 29E-H929
Required: 1
middle carburettor
To 29E-H928
Required: 1
middle carburettor
From 29E-H929
Required: 1
rear carburettor
To 29E-H928
Required: 1
rear carburettor
From 29E-H929
Required: 1
for SU carburettors - bore: 0.070"
Required: 3
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat
Required: 3
float
Fits to the original float lid only
Required: 3
for SU-HS carburettors
May replace illustrations 17 and 19
Required: 3
for SU HS type carburettor - uprated 'unsinkable' type, made from closed cell Nitrile rubber foam, resistant to modern ethanol based fuels
Required: 3
float chamber - front and rear carburettor
To 29E-H928
Required: 2
float chamber - front and rear carburettor
From 29E-H929
Required: 2
float chamber - middle carburettor
To 29E-H928
Required: 1
float chamber - middle carburettor
From 29E-H929
Required: 1
fixed type - marked: DJ, standard
Required: 3
fixed type - marked: DK, rich
Required: 3
fixed type - marked: DH, weak
Required: 3
front carburettor
Required: 1
middle carburettor
Required: 1
rear carburettor
Required: 1
with spring - carburettor piston
Required: 3
front and rear carburettor - diameter: 0.090". Identification: white marking sleeve
Required: 2
middle carburettor - identification: blue marking
Required: 1
with 3/8"-26 BSB coarse threat - for SU-HS carburettors with fixed metering needle
Contains illustrations 33 to 37
Required: 3
with 3/8"-26 BSB coarse threat - for SU-HS carburettors with fixed metering needle
Required: 3
for mixture adjusting on main jet - variant with 3/8"-26 BSB coarse threat
Required: 3
standard size - for SU-HS4 carburettors
Required: 3
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
For bodies with worn cast in bushes
Required: 6
front and rear carburettor
Required: 2
middle carburettor
Required: 1
throttle spindle on front carburettor - stainless steel reproduction
Required: 1
middle and rear carburettor
Required: 2
middle carburettor - supplied in pairs
Required: 1
front and rear carburettor - supplied in pairs
Required: 2
with link, front and rear carburettor
Required: 2
choke lever guide - complete kit with sleeve and washers
Contains illustrations 68 to 70
Required: 3
overflow hose to carburettor
Required: 1
made from nitrile rubber. Inner diameter: 5/16", outer diameter: 1/2", braided with zinc plated wire
Braided with zinc plated wire
Required: 1
for front and centre carburettor
Required: 1
for two SU-HS4 type carburettors. Comprising service kit 200208 plus throttle discs and throttle spindles
Required: 1
for rear carburettor
Comprising service kit 214270 plus throttle disc and throttle spindle
Required: 1
for jet adjusting on SU carburettors - 9/16" AF
Required: 1
