Exhaust system - Series I from 1973 and Series II to 1976
exhaust to down pipe and down pipe to manifold - reproduction with 47.6 mm inner diameter, 63.4 mm outer diameter and 26.0 mm total height
To February/March 1975
Required: 2
down pipe to manifold - OE specification with 47.5 mm inner diameter, 63.1 mm outer diameter and 26.0 mm total height
To February/March 1975
Required: 2
down pipe to exhaust manifold
To February/March 1975 - identify by sealing ring with 25 mms total height
Required: 8
down pipe to exhaust manifold
To February/March 1975 - identify by sealing ring with 25 mms total height
Required: 8
stainless steel - 4.2 models
To February/March 1975 - identify by sealing ring with 25 mms total height
Required: 1
mild steel - 2.8 models
To February/March 1975 - identify by sealing ring with 25 mms total height
Required: 1
down pipe to exhaust manifold - inner diameter: 51 mm, total height: 12.5 mm
From February/March 1975 - identify by sealing ring with 12.5 mms total height
Required: 2
down pipe to exhaust manifold - inner diameter: 51 mm, total height: 12.5 mm
From February/March 1975 - identify by sealing ring with 12.5 mms total height
Required: 2
From February/March 1975 - identify by sealing ring with 12.5 mms total height
Required: 8
From February/March 1975 - identify by sealing ring with 12.5 mms total height
Required: 8
stainless steel
From February/March 1975 - identify by sealing ring with 12.5 mm total height
Required: 1
mild steel
Long wheel base Saloon
Required: 1
stainless steel
Long wheel base Saloon
Required: 1
mild steel
Short wheel base Saloon and Coupe
- alternatives
Required: 1
stainless steel
Short wheel base Saloon and Coupe
- alternatives
Required: 1
RH rear - stainless steel
Required: 1
LH rear - stainless steel
Required: 1
exhaust to down pipe - reproduction with 50.7 mm inner diameter, 67.2 mm outer diameter and 26.9 mm total height
Exhaust to down pipe
Required: 1
stainless steel - diameter range: 45 to 51 mm
Required: 4
Centre exhaust mounting to 1974
Required: 2
centre exhaust mounting, RH side
to 1974
Required: 1
centre exhaust mounting, LH side
to 1974
Required: 1
centre mounting above rear axle on LH exhaust link pipe
from 1975
Required: 1
centre mounting above rear axle on RH exhaust link pipe
from 1975
Required: 1
Centre exhaust mounting from 1975
Required: 2
Centre exhaust mounting from 1975
Required: 4
Centre exhaust mounting from 1975
Required: 2
Centre exhaust mounting from 1975
Required: 2
in boot floor
Required: 2
less down pipe, stainless steel
Short wheel base Saloon and all Coupe
Required: 1
less down pipe, stainless steel
LWB
Required: 1
down pipe
Required: 1
Required: 1
Required: 1
centre silencer
Required: 2
rear axle
Required: 1
RH rear silencer
Required: 1
LH rear silencer
Required: 1
Supplied in metres -
Required: 18
