SU-HD8 internal carburettor - BJ8
with vent and hexagonal brass head - length of the rod: 2.375"
Required: 2
with vent and hexagonal black plastic head - length of the rod: 2.375"
Required: 2
piston return - paint colour on end coil: red/green
Required: 2
with piston
Required: 2
fixed type - marked: UH, standard
Required: 2
fixed type - marked: UN, rich
Required: 2
fixed type - marked: UL, weak
Required: 2
idle control - complete kit with spring and washers
Required: 2
idle control - separately
Required: 2
front carburettor
Required: 1
rear carburettor
Required: 1
with spring - carburettor piston
Required: 2
for SU-HD carburettors with fixed metering needle
Required: 2
for SU-HD8 carburettors - variant with standard size
Required: 2
for SU-HD8 carburettors - variant with 0.010" oversize
Required: 2
front and rear carburettor
Required: 2
throttle spindle stop lever and lost motion lever
Required: 4
throttle spindle stop lever - outer
Required: 4
throttle spindle stop lever - inner
Required: 4
brass - fuel pipe to front carburettor
Required: 1
brass - fuel pipe to rear carburettor
Alternatives
Required: 1
steel - fuel pipe to rear carburettor
Alternatives
Required: 1
and spring - inside float chamber lid on SU carburettors
Required: 2
front carburettor
Copy with 2.3/8" diameter, please use with float lever 3141
Required: 1
rear carburettor
Copy with 2.3/8" diameter, please use with float lever 3141
Required: 1
float lid - with hexagonal zinc plated head
Required: 2
for SU-HD8 carburettor identification - blank
Required: 2
for SU carburettors - bore: 0.096"
Required: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat
Required: 2
float on SU carburettors - height: 1/4". Fits to the original float chamber lid only
Use only with the original float chamber lid
Required: 2
float
Use with float chamber lids 20669 and 20670
Required: 2
services one SU-HD8 carburettor
Required: 2
services one SU-HD8 carburettor. Comprising service kit 200204 plus throttle disc and throttle spindle
Comprising service kit 200204 plus throttle disc and throttle spindle
Required: 2
for jet adjusting on SU carburettors - 9/16" AF
Required: 1
for SU-HD8 carburettors. Chromed with 89 mm total height
Construction height: 89 mm
Required: 2
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
For bodies with worn cast in bushes
Required: 4
