A-type Overdrive BN2 to BJ8 - internal parts
'A' type with 28% ratio, serial no. 28/61308 - reconditioned, in exchange
BN2 (1955-56)
Required: 1
'A' type with 28% ratio, serial no. 28/61447 - reconditioned, in exchange
BN4 and BN6 (1956-59)
Required: 1
'A' type, serial no. 28/61447, ratio: 28% - reconditioned. This item is sold on an outright basis
BN4 and BN6 (1956-59)
Required: 1
'A' type with 22% ratio, serial no.'s: 22/61709, 22/63009 and 22/63087 - reconditioned, in exchange
BN7, BT7, BJ7 and BJ8 (1959-68)
Required: 1
'A' type with 22% ratio, serial no.'s: 22/61709, 22/63009 and 22/63087 - reconditioned. This item is sold on an outright basis
BN7, BT7, BJ7 and BJ8 (1959-68)
Required: 1
clutch sliding member - new item
Required: 2
clutch sliding member - used item
Required: 2
May replace nut 2828 and lock tab 205903
Required: 4
Required: 4
small - ball bearing to thrust ring
Required: 1
for thrust ring in 'A' type overdrive - supplied in sets of 8 with yellow/blue colour code
Required: 1
with pins assembly
Required: 1
large - ball bearing to thrust ring
Required: 1
sliding member - reconditioned, in exchange
Required: 1
overdrive - reduction: 28%
BN2, BN4 and BN6
Required: 1
overdrive - reduction: 22%
BN7, BT7, BJ7 and BJ8
Required: 1
bronze - at rear of sun wheel
Required: 1
sun wheel - 0,113" to 0,114"
Required: 1
sun wheel - 0,107" to 0,108"
Required: 1
sun wheel - 0,101" to 0,102"
Required: 1
sun wheel - 0,095" to 0,096"
Required: 1
sun wheel - 0,089" to 0,090"
Required: 1
sun wheel - 0,083" to 0,084"
Required: 1
sun wheel - 0,077" to 0,078"
Required: 1
bronze - at front of sun wheel
Required: 1
overdrive - reduction: 28%
BN2, BN4 and BN6
Required: 1
overdrive - reduction: 22%
BN7, BT7, BJ7 and BJ8
Required: 1
Required: 3
'A' type Overdrive with 28% reduction - reconditioned, in exchange
BN2, BN4 and BN6 (1955-59)
Required: 1
'A' type Overdrive with 22% reduction - reconditioned, in exchange
BN7, BT7, BJ7 and BJ8 (1959-68)
Required: 1
including roller set
Required: 1
uni directional clutch - supplied in sets of 12
Required: 1
uni directional clutch
Required: 1
bronze - uni directional clutch
Required: 1
with 15 teeth
BN2, BN4 and BN6
Required: 1
with 16 teeth
BN7, BT7, BJ7 and BJ8
Required: 1
with bearing assembly - feature: pinion with 15 teeth
BN2, BN4 and BN6
Required: 1
with 16 teeth - complete unit with bearing
BN7, BT7, BJ7 and BJ8
Required: 1
including overdrive gasket - 10 piece
BN4, BN6, BN7 to 16038 and BT7 to 15880 (cars with side shift gearbox)
Required: 1
with overdrive gasket - 11 piece set for vehicles with middle shift gearbox
BN7 from 16039 and BT7 from 15881 (cars with middle shift gearbox)
Required: 1
in anulus to adapt main shaft
Required: 1
